3D-printed workable track links KV-1
Rye Field Model | No RM-2037 | 1:35
Факти
- Марка:
- Rye Field Model (RFM)
- Наименование:
- 3D-printed workable track links KV-1
- Номер:
- RM-2037
- Мащаб:
- 1:35
- Тип:
- Набор за детайлиране
- В продажба:
- 2022 Нова матрица
- Баркод:
- 4897062621207 (EAN)
- Тема:
- Kliment Voroshilov tank » Танкове (Превозни средства)
Съдържание на кутията
Размери:
150x130x25 mm
(5.9x5.1x1 inch)
Тегло:
60 g (0.13 lbs)
Предназначен за
Универсален афтърмаркет.
Пазар
No partner shops available
Преглед на съдържанието
Външни прегледи
Коментари
Tomasz Hejmo
Some links are printed in slightly different size what leads to fitting issues - you basically need to push two links against themselves and move them vigorously to remove some resin. Every link has about 6 residues of supports which should be sanded for both better fit and appearance. Pins can be very loose, sit nicely or sit tightly - I ended fixing all of them with drop of CA. Assembly took a lot of time, similar to the plastic ones I believe. After all, some links just cracked near the joint, they're too brittle to be repaired and got binned.
Some links are printed in slightly different size what leads to fitting issues - you basically need to push two links against themselves and move them vigorously to remove some resin. Every link has about 6 residues of supports which should be sanded for both better fit and appearance. Pins can be very loose, sit nicely or sit tightly - I ended fixing all of them with drop of CA. Assembly took a lot of time, similar to the plastic ones I believe. After all, some links just cracked near the joint, they're too brittle to be repaired and got binned.
10 November 2023, 15:37
Материал за справка
KV Soviet Heavy Tanks The Soviet Tank that Paved the Road to Victory Prototypes – ...
Jochen Vollert
2024 KV Soviet Heavy Tanks Prototypes – Pre-Series – KV-1 – KV-2 and the German KW I/KW...
Jochen Vollert
2024 Всички книги » (19 общо) Всички walkarounds » (27 общо)